dens_l 1e3[kg/m^3] "Liquid density"
l_compartment 0.9[mm] "Compartment length"
l_dr_limit l_reservoir+l_nozzle+4*l_nozzle_tip "Limit for droplet volume integration"
l_nozzle 0.375[mm] "Cone-shaped nozzle section length"
l_nozzle_tip 0.025[mm] "Length of nozzle tip"
l_reservoir 0.2[mm] "Ink reservoir length"
r_compartment 0.1[mm] "Comparment radius"
r_nozzle 0.025[mm] "Radius of nozzle tip"
r_outlet 0.2[mm] "Radius at the outlet"
r_reservoir 0.1[mm] "Ink reservoir radius"
surf_tens 0.07[N/m] "Surface tension"
theta pi/4[rad] "Contact angle"
time_plot 80[us] "Plot time for transient plot"
time_plot_1 time_plot/4 "First time value for 2D plots"
time_plot_2 2*time_plot/4 "Second time value for 2D plots"
time_plot_3 3*time_plot/4 "Third time value for 2D plots"
time_plot_3d 120[us] "Time for 3D plot"
tint 15[us] "Interval for pulse from 0 signal at the beginning to zero signal at the end"
tsim 200e-6[s] "Simulation time"
tsim_inc 10[us] "Time step size"
tsm 2[us] "Smoothing time for injection pulse"
tst 0[s] "starting time of the pulse"
v_inlet 0.5[m/s] "Inlet average velocity"
visc_l 1e-2[Pa*s] "Liquid viscosity"
w_outlet 0.1[mm] "Outlet width"