Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

moving conductor in air

Posted Dec 8, 2010, 7:48 a.m. EST Low-Frequency Electromagnetics 0 Replies

Steven Yan
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi
I built a 2D AC/DC module. There is a copper conductor surrounded by air, and the condutor is moving in the air. I want to know the magntic field in the air generated by the moving conductor. I used deformed mesh to difine the displacement of the condutor. But I faced to problems: after the conducor moved away, the area where the conductor was initial was empty, which I supposed to be displaced by air. And the magnetic field in the air did not change with the conductor. If I used "assembled", the boundary did not continous. How to solve the problems?

Thanks in advance!
0 Replies Last Post Dec 8, 2010, 7:48 a.m. EST
COMSOL Moderator

Hello Steven Yan

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content