Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Export to Matlab - matlab.m hidden
Posted Dec 21, 2010, 11:00 a.m. EST Version 3.5a 0 Replies
Please login with a confirmed email address before reporting spam
I started to use matlab with COMSOL one year ago. I created a basic model with comsol using the GUI (see the attachement). Now I would like export this model to matlab. Here my steps :
1) - Open Comsol with Matlab ----->open My model----->File----->Export-----> Fem structure (by using the name 'TESTM');
2) -In matlab interface : 'TESTM'
I obtain :
***************************
version: [1x1 struct]
meshtime: 't'
appl: {[1x1 struct]}
geom: [1x1 solid2]
mesh: [1x1 femmesh]
sdim: {'x' 'y'}
frame: {'xy'}
shape: {'shlag(2,'u')'}
gporder: 4
cporder: 2
sshape: 2
simplify: 'on'
border: 1
form: 'coefficient'
units: [1x1 struct]
equ: [1x1 struct]
bnd: [1x1 struct]
pnt: [1x1 struct]
var: {}
expr: {}
draw: [1x1 struct]
const: {}
globalexpr: {}
functions: {}
solform: 'weak'
xmesh: [1x1 com.femlab.xmesh.Xmesh]
sol: [1x1 femsol]
**********************************************************
Unfortunately, I cannot edit the true matlab.m file corresponding to my initial model.mph. ! How retrieve this file, I mean the full matlab file.m ?
This file should be of the form :
***********
clear fem
fem.geom = square2(2,'pos',[-1 -1]) + circ2(0.4);
fem.mesh = ...
...
...
postsurf(fem,'u');
********
Thank you for your help
Luiz
Attachments:
Hello Luiz Fernado
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.