Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Immersed boundary condition doable in comsol in solid as well as fluid?

Posted Jan 16, 2011, 10:10 p.m. EST 1 Reply

Gyu Lim
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I was not able to find a feature to apply immersed boundary condition for solid in comsol.
Is it possible to do so?
1 Reply Last Post Jan 17, 2011, 12:41 a.m. EST
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jan 17, 2011, 12:41 a.m. EST
Hi

is it FSI (Fluid Structure Interaction ?) you are looking after, there the link of fluid pressure on bondary load and ALE linking of the displacement is readily set-up. If you do not have FSI toolbox you will have to build thephysics yourself

--
Good luck
Ivar
Hi is it FSI (Fluid Structure Interaction ?) you are looking after, there the link of fluid pressure on bondary load and ALE linking of the displacement is readily set-up. If you do not have FSI toolbox you will have to build thephysics yourself -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content