Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

why partial derivative of the hydrostatic pressure field equals to 0?

Posted Jul 16, 2019, 9:31 p.m. EDT Structural & Acoustics Version 5.2a 1 Reply

Yang Fuqiang
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Excuse me, I solved the two-dimensional hydrostatic pressure field solid.p. The hydrostatic pressure solid.p distribution is not uniform. Use d(solid.p, x) to solve the partial derivative of solid.p along the x direction. Why is the calculation result 0?

1 Reply Last Post Jul 16, 2019, 9:52 p.m. EDT
Yang Fuqiang
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 5 years ago Jul 16, 2019, 9:52 p.m. EDT
Updated: 5 years ago Jul 16, 2019, 9:53 p.m. EDT

I think I have found the problem, when I use X instead of x in d(solid.p,x), I solved it. The X and x are different in comsol.

I think I have found the problem, when I use X instead of x in d(solid.p,x), I solved it. The X and x are different in comsol.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content