Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Warning: Low minimum element quality

Posted Jul 22, 2019, 10:05 p.m. EDT Acoustics & Vibrations Version 5.4 1 Reply

Kaki Kaki
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello everyone,

I am having a problem getting accurate end results In my solutions. Whenever I Compute my program I just get zeros across the board for all solutions. I keep getting a warning signal saying " low minimum element quality" in my mesh tab. Any help would be highly appreciated, thanks.

1 Reply Last Post Jul 22, 2019, 10:35 p.m. EDT
Robert Koslover Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 5 years ago Jul 22, 2019, 10:35 p.m. EDT
Updated: 5 years ago Jul 22, 2019, 10:35 p.m. EDT

If you get a purely zero solution everywhere, low minimum element quality is probably not your only problem. I suggest you upload your model to the forum so that others can look at it and offer advice. There are many possible causes.

-------------------
Scientific Applications & Research Associates (SARA) Inc.
www.comsol.com/partners-consultants/certified-consultants/sara
If you get a purely zero solution everywhere, low minimum element quality is probably not your only problem. I suggest you upload your model to the forum so that others can look at it and offer advice. There are many possible causes.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content