Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Transient stress response acoustic silicon membrane
Posted Jul 24, 2019, 9:46 a.m. EDT Structural & Acoustics, Acoustics & Vibrations, Studies & Solvers Version 5.4 0 Replies
Please login with a confirmed email address before reporting spam
Hi all, I am new to COMSOL. I have already performed eigenfrequency analysis of a 2D silicon plate clamped at both ends vibrating in air. I now want to simulate the transient response of the motion by exciting the plate with a ultrasonic source close to the resonant frequency incident on the plate from top (in air). Is there a tutorial for this exercise available? I have doubts on how to correctly defining a sinusoidal excitation, and set the appropriate solver settings for this.
Hello Satadal Dutta
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.