Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Mesh size decrease making time dependent model not converge for as long
Posted Apr 24, 2020, 8:24 p.m. EDT Structural & Acoustics, Geomechanics, Mesh Version 5.4 0 Replies
Please login with a confirmed email address before reporting spam
I’m running a time dependent model of ice deformation. Generally, I've experienced smaller mesh sizes improving results. However, I’ve recently been encountering some situations where a finer mesh is causing a time dependent model to not converge over as long a period of time. For example for the attached model, with a coarser mesh it will converge up to about 600 years, while a coarse mesh will converge to 250, and a normal mesh will converge only to 140. I'm using COMSOL's default solver settings, which have generally worked well for me, including in similar models. I'd appreciate any suggestions on what I might try to fix this problem.
Attachments:
Hello Claire Cook
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.