Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Perfect Electrical Conductor Problem

Posted Apr 29, 2020, 1:12 p.m. EDT Electromagnetics, RF & Microwave Engineering 1 Reply

Louis Chomas
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I'm having a problem where when I draw a geometry all of the boundaries are automatically selected as perfect electrical conductors and I can't change this. I've been trying to follow along with the RF power transfer example and I can't because it makes everything a PEC. What's going on?

1 Reply Last Post Apr 29, 2020, 3:42 p.m. EDT
Edgar J. Kaiser Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 5 years ago Apr 29, 2020, 3:42 p.m. EDT

Louis,

PEC is the default. You can add, e.g. an impedance BC node, select boundaries and they will be overridden in the default PEC node.

Cheers Edgar

-------------------
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
Louis, PEC is the default. You can add, e.g. an impedance BC node, select boundaries and they will be overridden in the default PEC node. Cheers Edgar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content