Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

SPRAY NOZZLE MODELLING

Posted Feb 27, 2012, 6:55 p.m. EST 0 Replies

Abubakar Abbas
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi all,
I am a Ph.D student currently trying to model and simulate some part of my work with COMSOL,i intend to use a high pressure water spray to remove foulings from pipe section but my difficulty has been developing a spray nozzle with COMSOL, that can utilise up to 100bar spray water pressure.It is intended to use some parameters like pressure pressure, spray angle, water flowrate, downstream distances etc in order to verify different impact force of the droplet liquid particles.Kindly guide me as i am a new person in COMSOL.
Many Thanks.
0 Replies Last Post Feb 27, 2012, 6:55 p.m. EST
COMSOL Moderator

Hello Abubakar Abbas

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content