Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
MEMs modelling
Posted Feb 28, 2012, 11:54 a.m. EST 1 Reply
Please login with a confirmed email address before reporting spam
Hi everyone,
I'm a chemist who is hoping to start using microfabrication and was hoping to do some modelling before I moved into the actual experiments. I've installed COMSOL at the recommendation of a friend but was wondering if anyone had some MEMs models they could send me ? I've also got Matab. Any help anyone could offer would be very appreciated since I've always been more of an experimentalist and this stuff is VERY new to me.
I'm a chemist who is hoping to start using microfabrication and was hoping to do some modelling before I moved into the actual experiments. I've installed COMSOL at the recommendation of a friend but was wondering if anyone had some MEMs models they could send me ? I've also got Matab. Any help anyone could offer would be very appreciated since I've always been more of an experimentalist and this stuff is VERY new to me.
1 Reply Last Post Feb 29, 2012, 12:54 a.m. EST
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
really the best way to start is to look at the videos in the main www site of COMSOL, then take the exercices of the model library and go through them
--
Good luck
Ivar
really the best way to start is to look at the videos in the main www site of COMSOL, then take the exercices of the model library and go through them
--
Good luck
Ivar