Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Problem setting up multigrid
Posted Mar 5, 2012, 9:29 a.m. EST Fluid & Heat, Computational Fluid Dynamics (CFD), Microfluidics, Battery Design, Chemical Reaction Engineering, Mesh, Modeling Tools & Definitions, Parameters, Variables, & Functions, Results & Visualization, Studies & Solvers Version 4.2 0 Replies
Please login with a confirmed email address before reporting spam
I am trying to model the evacuation of air through narrow gaps and i get this error in setting up multigrid. I have attached the comsol file with this post. can anyone help?
Problem setting up multigrid.
Failed to build feature 'bl1' in sequence 'mesh1'.
Failed to generate mesh for domain.
- Domain: 1
Failed to respect boundary element edge on geometry face.
- Face: 1
- x-coordinate: -0.0105115
- y-coordinate: -0.149616
- z-coordinate: 7.5e-005
Internal error in boundary respecting.
Error in multiphysics compilation.
Attachments:
Hello Bhageshvar Mohan
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.