Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Using "Stored Solution" in another Study

Posted Mar 21, 2012, 11:20 a.m. EDT Version 4.2a 1 Reply

Jessica
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

In my model, I have two Studies. In the first study, I Store the solution to use it as the initial condition for the 2nd Study. I was wondering if cross-Study use of "Store Solution" is valid, or it is only valid within a single Study.

Thanks,
Jessica

1 Reply Last Post Mar 21, 2012, 1:44 p.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Mar 21, 2012, 1:44 p.m. EDT
Hi

check the tag names ans the Data set, I believe its' the Data set DB that COMSOL uses to extract the desired initial condition for any further study, as with solution, you must precise which one, and at which time or parameter value, if applicable

--
Good luck
Ivar
Hi check the tag names ans the Data set, I believe its' the Data set DB that COMSOL uses to extract the desired initial condition for any further study, as with solution, you must precise which one, and at which time or parameter value, if applicable -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content