Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

eigenfrequency of beam coated with a thin layer

Posted Apr 10, 2012, 4:56 p.m. EDT Structural Mechanics Version 4.2a 0 Replies

Francisco Javier Willars Rodriguez
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi all,

My project consists in calculating the eigenfrequency of a structural steel beam covered with aluminum. The dimensions of the beam are (50x10x1cm) and the coating thickness is 1 mm.
The project is 3D, solid mechanics, eigenfrequency, and it is an error in the mesh.
The second project was realized in 3D, solid mechanics, Shell, eigenfrequency and the result which gives the frequency of the solid and Shell.
My question is there a method to calculate the total frequency of the solid and Shell.
An apology for my bad English

Thanks.
0 Replies Last Post Apr 10, 2012, 4:56 p.m. EDT
COMSOL Moderator

Hello Francisco Javier Willars Rodriguez

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content