Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Sinusoidal displacement

Posted Oct 5, 2021, 9:36 a.m. EDT Structural & Acoustics, Acoustics & Vibrations 1 Reply

Natalia Guevara
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

I need to simulate a sinusoidal displacement that is imposed by a tool to a solid plate (see image). The amplitude (A) is 50 and it moves at a frequency of 50 kHz. I tried with prescribed displacement, but it does not include the option of frequency. I would appreciate any help. Thank you.

1 Reply Last Post Oct 5, 2021, 1:29 p.m. EDT
Edgar J. Kaiser Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 3 years ago Oct 5, 2021, 1:29 p.m. EDT

Natalia,

you can run a frequency domain study and the prescribed displacement will be applied at the study frequency.

Cheers Edgar

-------------------
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
Natalia, you can run a frequency domain study and the prescribed displacement will be applied at the study frequency. Cheers Edgar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content