Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
How to export the x,y,z coordinates
Posted Aug 24, 2012, 4:54 p.m. EDT Geometry, Mesh 1 Reply
Please login with a confirmed email address before reporting spam
I created 7x7x7 cubical shape and want to export the x,y,z coordinates in the pattern that I want as attached. Please help me.
Attachments:
1 Reply Last Post Aug 24, 2012, 7:11 p.m. EDT
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi,
You can get nodal or integration point coordinates through a simple command in matlab, if this is what you are seeking. But you can put it in any format.
% have to load mph here
model = mphload('filename');
info = mphxmeshinfo(model,'solname', 'sol1', 'studysteptag', 'st1');
'info' is a structure and has all information.
I guess you could also export directly from the GUI in mphtxt format which should give similar information, but I have never used this.
Suresh
You can get nodal or integration point coordinates through a simple command in matlab, if this is what you are seeking. But you can put it in any format.
% have to load mph here
model = mphload('filename');
info = mphxmeshinfo(model,'solname', 'sol1', 'studysteptag', 'st1');
'info' is a structure and has all information.
I guess you could also export directly from the GUI in mphtxt format which should give similar information, but I have never used this.
Suresh