Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

PML Implementation

Posted Nov 15, 2012, 4:40 a.m. EST Version 4.0a 1 Reply

WWH Wang
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi all,
I generally have a PML implementation issue. I simulate my wave equation in a 2D weak PDE form, namely -ux*test(ux)-uy*test(uy)+k^2*u*test(u) in a square region. Outside are the PML domains. So i would like to ask how to set the PML domain in this situation ?

Any hints will be most appreciated.

wang
1 Reply Last Post Apr 26, 2015, 1:03 p.m. EDT
COMSOL Moderator

Hello WWH Wang

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Ulac Smah
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 10 years ago Apr 26, 2015, 1:03 p.m. EDT
Hello,
I was asking for the same problem, I looked everywhere and I didn't find anything about it! Did you figured out the problem?
Thanks!
Hello, I was asking for the same problem, I looked everywhere and I didn't find anything about it! Did you figured out the problem? Thanks!

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content