Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

design of electromagnetic generator

Posted Dec 1, 2023, 12:24 a.m. EST Electromagnetics, Modeling Workflow, Physics Interfaces Version 6.0 1 Reply

Da NY
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

How do I design an electromagnetic generator that harvest kinetic energy / arms degree of freedom for generating useful electrical power using comsol 6.0

1 Reply Last Post Dec 1, 2023, 2:40 a.m. EST
Edgar J. Kaiser Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 11 months ago Dec 1, 2023, 2:40 a.m. EST

I advise to do some extensive research in the literature and the internet, check examples in COMSOL resources, decide what kind of design you want and then come up with more specific questions based on your own modeling attempts, results and probably failures.

-------------------
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
I advise to do some extensive research in the literature and the internet, check examples in COMSOL resources, decide what kind of design you want and then come up with more specific questions based on your own modeling attempts, results and probably failures.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content