Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

CNTFET design

Posted Dec 2, 2023, 4:10 a.m. EST Mesh, Modeling Tools & Definitions, Modeling Workflow 1 Reply

Shadi Ihtiaj Zim
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

how can i design CNTFET?i am having problems setting up the boundary conditions

1 Reply Last Post Dec 3, 2023, 11:51 a.m. EST
Robert Koslover Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 11 months ago Dec 3, 2023, 11:51 a.m. EST
Updated: 11 months ago Dec 3, 2023, 11:40 a.m. EST

Although it is possible that someone here just might be able to answer your question without additional information, I encourage you to post your .mph file to the forum, so that any issue(s) in your particular model will be easier to identify.

-------------------
Scientific Applications & Research Associates (SARA) Inc.
www.comsol.com/partners-consultants/certified-consultants/sara
Although it is possible that someone here just might be able to answer your question without additional information, I encourage you to post your .mph file to the forum, so that any issue(s) in your particular model will be easier to identify.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content