Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Outputting the stiffness matrix at each time step during the simulation
Posted Dec 8, 2023, 5:17 a.m. EST Structural Mechanics, Material Models, Structural Dynamics Version 5.6 0 Replies
Please login with a confirmed email address before reporting spam
Dear all,
Hello, I would like to ask you a question about extracting the stiffness Matrix K at each time step during the Comsol simulation of a non-linear unsteady elasticisity problem. I need that in order to perform model order reduction of the non-linear model.
I have seen that there are discussions which were aimed at this goal in the past but without clear solution or at least an indication that this is impossible in Comsol. The function 'mphmatrix' in Matlab has an argument called 'Solnum' but when I set it to say 24 or any other time step I got an error which says :
error using mphmatrix cannot set the property 'solnum' to '24'. allowed values are: 'auto' 'first' 'last' 'interp' 'manual' '1'
Could you please help me in answering this question ? Thank you in advance.
Best regards, Saddam
Hello Saddam Hijazi
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.