Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Prescribed Displacement Boundary Condition

Posted Jan 20, 2024, 6:14 p.m. EST Geometry, Modeling Workflow Version 6.2 1 Reply

Priyanshu Asthana
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hii,

I am studying the Conical Mandrel Bending test. As a part of it I have to deofrm a metal sheet into a conical Shape.

I am trying to use the Prescribed Displacement Boundary Condition to defrom the metal sheet into a conical structure. However I am unable to perform it. Can someone please help me with this.

i am attaching the .mph file which has Metal Sheet and Conical Mandrel (Disables within Geometry). I want to deform the metal sheet into the shape of conical mandrel.

Thank you

Attachments:

1 Reply Last Post Jan 21, 2024, 8:30 a.m. EST
Acculution ApS Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 months ago Jan 21, 2024, 8:30 a.m. EST

To change the shape into a cone, there should for one be non-linear geometry included. And I think you should look into follower loads.

-------------------
René Christensen, PhD
Acculution ApS
www.acculution.com
info@acculution.com
To change the shape into a cone, there should for one be non-linear geometry included. And I think you should look into follower loads.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content