Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Smooth plot for DEP
Posted Feb 20, 2024, 3:17 p.m. EST Mesh, Studies & Solvers Version 6.1 1 Reply
Please login with a confirmed email address before reporting spam
I am simulating dielectrophoresis in the fluid domain. For this, I first simulate the electric potential along the electrode edge. The potential plot along the electrode has to be smooth for my calculations, but unfortunately, I am getting noise in the plot even with a mesh of 0.075, which increases exponentially for electric field normal and other subsequent calculations. The smoothing factor in the plot setting has not been helpful either. Is there a way that I can get a very smooth electric potential plot without the noise and is the smoothed electric potential data automatically used for the electric field normal plot by the COMSOL?"
Please login with a confirmed email address before reporting spam
I suggest you post your .mph file to the forum to allow others to inspect your settings (there are many that could make a difference here) and to observe the noise that you mention.
-------------------Scientific Applications & Research Associates (SARA) Inc.
www.comsol.com/partners-consultants/certified-consultants/sara