Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Need Assistance with Obtaining Load vs. Displacement Graphs and finding peak load in Tensile Test Simulation
Posted Apr 3, 2024, 3:21 a.m. EDT Structural Mechanics 0 Replies
Please login with a confirmed email address before reporting spam
I'm currently working on a simulation in COMSOL Multiphysics to model the tensile behavior of a PETG material specimen. However, I'm encountering difficulties in obtaining the load vs. displacement graphs from the simulation results.
I've set up the model and successfully run the simulation, but I'm unsure how to generate the load vs. displacement graphs to analyze the tensile behavior accurately. Could someone provide guidance on how to generate these graphs in COMSOL Multiphysics? Additionally, once I have the load vs. displacement data, I would like to accurately determine the peak load (maximum load sustained) and break load (load at failure) from the simulation results.
Any insights, step-by-step instructions, or suggestions on how to obtain and analyze the load vs. displacement data would be greatly appreciated. Thank you for your assistance!"
Hello Bollam Lava Naga Venkata Rangarao
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.