Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Post processing for Metasurface Beam Deflector (angle of deflection)
Posted Apr 3, 2024, 1:52 p.m. EDT Wave Optics, Results & Visualization, Studies & Solvers 0 Replies
Please login with a confirmed email address before reporting spam
Hello all,
I am working with a simulation very similar to Metasurface Beam Deflector (ID: 115971) in the Application Gallery. I am having some difficulty on the post processing end deriving certain data values.
In particular, I need to know the phase shift/angle for a particular radius of silicon post in my single post analysis (such that I could graph post radius vs angle). I also need to find the angle of deflection of the metasurface array compared to the incident angle. How would I go about achieving this?
I would greatly appreciate any insight you folks might have.
Hello Matthew Baker
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.