Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Shunt-mode Proximity Capacitive Sensing Model

Posted May 6, 2024, 12:59 p.m. EDT Studies & Solvers, Modeling Workflow, Physics Interfaces 0 Replies

Afiq Azizi Ali
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi All,

I'm trying to simulate a shunt-mode proximity capacitive sensing model and measure SNR, sensitivity, as well as accuracy for the performance evaluation. My plan is to have one conductive plate connected to AC source and act as a transmitter, and another plate will act as the receiver and connected to a receiver circuit to measure the displacement current caused by changes in electric flux.

However, I'm pretty much very new to COMSOL and don't know where to start. What physics are required, which solver/study should I use and how should I do it. Hope you guys can help me.

Thanks!

0 Replies Last Post May 6, 2024, 12:59 p.m. EDT
COMSOL Moderator

Hello Afiq Azizi Ali

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content