Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Coil Feature Magnetic Field Interface

Posted May 29, 2024, 10:36 a.m. EDT Electromagnetics, Low-Frequency Electromagnetics, Physics Interfaces Version 5.5 2 Replies

Rachel Rakushkin
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi there, I'm trying to model a coil. I'm currently using the 5.5 version (build 359) and when I head over to right click on the magnetic field section, I don't see any coil features even though I believe they are supposed to be there. I was wondering what might be the problem. Thanks!

2 Replies Last Post May 29, 2024, 2:24 p.m. EDT
Edgar J. Kaiser Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 months ago May 29, 2024, 1:25 p.m. EDT

Rachel,

could it be that you don't have the AC/DC application module? In this case only a few mf related items are available in the COMSOL main module.

Cheers Edgar

-------------------
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
Rachel, could it be that you don't have the AC/DC application module? In this case only a few mf related items are available in the COMSOL main module. Cheers Edgar
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 9 months ago May 29, 2024, 2:24 p.m. EDT

Hello Rachel,

I think Edgar is right. To check whether the license you are using includes the AC/DC Module, go to File > Licensed and Used Products.

Note that even without the AC/DC Module you will have an "AC/DC" folder in the Model Wizard; it is not an indication of whether the license includes the AC/DC Module (I know, it's confusing).

Best,

Jeff

-------------------
Jeff Hiller
Hello Rachel, I think Edgar is right. To check whether the license you are using includes the AC/DC Module, go to File > Licensed and Used Products. Note that even without the AC/DC Module you will have an "AC/DC" folder in the Model Wizard; it is not an indication of whether the license includes the AC/DC Module (I know, it's confusing). Best, Jeff

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content