Simulating partial discharge (PD) using RF module

Please login with a confirmed email address before reporting spam

Hello,

I want to simulate a cavity or void that acts as a PD to see its electromagnetic waves. Is there any way to do it?


5 Replies Last Post May 30, 2024, 9:15 p.m. EDT
Edgar J. Kaiser Certified Consultant

Please login with a confirmed email address before reporting spam

Posted: 5 months ago May 29, 2024, 2:47 p.m. EDT

That may be possible in a time dependent study in the RF module.

-------------------
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
That may be possible in a time dependent study in the RF module.

Please login with a confirmed email address before reporting spam

Posted: 5 months ago May 29, 2024, 6:27 p.m. EDT

Hi Edgar,

Yes, I know it is possible, but I don't know how to do that. For example, how do we define boundary conditions and lumped ports for it?

Hi Edgar, Yes, I know it is possible, but I don't know how to do that. For example, how do we define boundary conditions and lumped ports for it?

Edgar J. Kaiser Certified Consultant

Please login with a confirmed email address before reporting spam

Posted: 5 months ago May 30, 2024, 2:52 a.m. EDT

This needs extensive analysis of your project. Partial discharge comes in many flavours. I advise to check application library examples to learn about available BCs, ports and the like. Start simple and increase complexity step by step.

-------------------
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
This needs extensive analysis of your project. Partial discharge comes in many flavours. I advise to check application library examples to learn about available BCs, ports and the like. Start simple and increase complexity step by step.

Please login with a confirmed email address before reporting spam

Posted: 5 months ago May 30, 2024, 11:01 a.m. EDT

I understand your point but found nothing related to this topic in the library examples.

I understand your point but found nothing related to this topic in the library examples.

Robert Koslover Certified Consultant

Please login with a confirmed email address before reporting spam

Posted: 5 months ago May 30, 2024, 9:15 p.m. EDT
Updated: 5 months ago May 30, 2024, 9:16 p.m. EDT

Perhaps take a look at the plasma module and the examples in the application gallery? https://www.comsol.com/plasma-module and https://www.comsol.com/models?q=partial%20discharge

-------------------
Scientific Applications & Research Associates (SARA) Inc.
www.comsol.com/partners-consultants/certified-consultants/sara
Perhaps take a look at the plasma module and the examples in the application gallery? https://www.comsol.com/plasma-module and https://www.comsol.com/models?q=partial%20discharge

Reply

Please read the discussion forum rules before posting.

Please log in to post a reply.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.