Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Acoustic Engineering Workflow (Loudspeaker)
Posted Jul 15, 2024, 1:49 a.m. EDT Structural & Acoustics, Acoustics & Vibrations, Modeling Workflow 0 Replies
Please login with a confirmed email address before reporting spam
I have a model of a Loudspeaker Driver in a Vented Enclosure in solidworks.
Due to the time taken in the simulation in 3D, Acoustics solid interaction module, i am thinking of using the Acoustics shell interaction module as used in the vented loudspeaker enclosure model from comsol tutorials(Loudspeaker_multiphysics_BEM_FEM_61).
I am using comsol 6.2 and In the Comsol educational model, the sound pressure and the deformation of the drive and the cabinet are simulated, but I want to simulate the air flow inside and outside the cabinet and how the air exits from the air vent.
I would like to please guide me how to use the physics of fluid flow and its combination with solid mechanic, Shell and acoustic modules? Thank you very much!
-------------------SahebVerya
Hello Verya Sahebi
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.