Modelling the heating of a reactor

Please login with a confirmed email address before reporting spam

Hi, i have to simulate the heating of a cylindrical reactor, which is obtained through a oven. I tried to use the natural convection method but the results are not good. Do you have any tip?


1 Reply Last Post Aug 3, 2024, 5:30 p.m. EDT
Robert Koslover Certified Consultant

Please login with a confirmed email address before reporting spam

Posted: 3 months ago Aug 3, 2024, 5:30 p.m. EDT
Updated: 3 months ago Aug 3, 2024, 5:31 p.m. EDT

There are many reasons a model may not yield correct results. I suggest you post your .mph file to the forum, along with: (1) any additional information you can provide about the physics/physical processes you are modeling, and (unless it is obvious), (2) how/why you have concluded that your present model's results are incorrect/unacceptable.

-------------------
Scientific Applications & Research Associates (SARA) Inc.
www.comsol.com/partners-consultants/certified-consultants/sara
There are many reasons a model may not yield correct results. I suggest you post your .mph file to the forum, along with: (1) any additional information you can provide about the physics/physical processes you are modeling, and (unless it is obvious), (2) how/why you have concluded that your present model's results are incorrect/unacceptable.

Reply

Please read the discussion forum rules before posting.

Please log in to post a reply.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.