How to Fill Internal Geometry with a Fluid

Please login with a confirmed email address before reporting spam

Hello, I am simulating a complex geometry in COMSOL that consists of various shapes (e.g., cones, cylinders), each with different radius. I want to fill all the internal hollows and gaps inside this geometry with a fluid. However, I do not want to create a separate cylinder or other simple geometry for filling, as the internal shape is quite complex and non-uniform.

Could someone please advise on the best method to automatically fill the entire internal space of such a complex geometry with a material? Any suggestions would be greatly appreciated!

Thank you!


1 Reply Last Post Sep 18, 2024, 9:18 a.m. EDT
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 1 month ago Sep 18, 2024, 9:18 a.m. EDT

Hello Niloofar,

See this thread.

Best,

Jeff

-------------------
Jeff Hiller
Hello Niloofar, See [this thread](https://www.comsol.com/forum/thread/134711/filling-an-empty-space-with-fluid-heat-transfer-in-solids?last=2017-01-27T19:12:42Z). Best, Jeff

Reply

Please read the discussion forum rules before posting.

Please log in to post a reply.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.