coupling between lumped mechanical module and solid

Please login with a confirmed email address before reporting spam

HI, i'm trying to model 100 discrete resonator as mass-spring system attach to a solid structure. when i solve the system in the frequency domain , apparently there is no difference with and without the discrete mass-spring systems. i have coupled the structure and the resonator using displacement node and each resonator is composed by mass, spring and free node.



3 Replies Last Post Oct 18, 2024, 2:45 a.m. EDT
Acculution ApS Certified Consultant

Please login with a confirmed email address before reporting spam

Posted: 2 weeks ago Oct 16, 2024, 9:16 a.m. EDT

Try and explore with 1 discrete system and make sense of that first. Look at some extreme case with high mass and/or high stiffness.

-------------------
René Christensen, PhD
Acculution ApS
www.acculution.com
info@acculution.com
Try and explore with 1 discrete system and make sense of that first. Look at some extreme case with high mass and/or high stiffness.

Please login with a confirmed email address before reporting spam

Posted: 2 weeks ago Oct 16, 2024, 9:59 a.m. EDT

Hi, i have tried but nothing is changing unfortunately.

Hi, i have tried but nothing is changing unfortunately.

Acculution ApS Certified Consultant

Please login with a confirmed email address before reporting spam

Posted: 2 weeks ago Oct 18, 2024, 2:45 a.m. EDT

Sorry, I don't have the necessary module to try this out.

-------------------
René Christensen, PhD
Acculution ApS
www.acculution.com
info@acculution.com
Sorry, I don't have the necessary module to try this out.

Reply

Please read the discussion forum rules before posting.

Please log in to post a reply.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.