parametrize time label in plots

Please login with a confirmed email address before reporting spam

In time dependent analysis there is a time label as in the attached. How to turn it into sth like time=T/3, time=T/2 that depends on t/T? Here the time domain t=[0,T], where T is a parameter.



2 Replies Last Post Nov 7, 2024, 3:08 a.m. EST
Magnus Ringh COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 2 weeks ago Nov 6, 2024, 5:21 a.m. EST
Updated: 2 weeks ago Nov 6, 2024, 5:22 a.m. EST

Hi,

Yes, with a manual plot title with the Parameter indicator set to Time=T/eval(T/t) you should get that type of label, if the time steps are fractions of T (see the attached screenshot). I would advice against the use of T for the final time if a heat transfer interface with a temperature T is included in the model.

Hi, Yes, with a manual plot title with the **Parameter indicator** set to `Time=T/eval(T/t)` you should get that type of label, if the time steps are fractions of `T` (see the attached screenshot). I would advice against the use of `T` for the final time if a heat transfer interface with a temperature *T* is included in the model.


Please login with a confirmed email address before reporting spam

Posted: 2 weeks ago Nov 7, 2024, 3:08 a.m. EST

Dr Ringh Thank you so much for your help once again.

Dr Ringh Thank you so much for your help once again.

Reply

Please read the discussion forum rules before posting.

Please log in to post a reply.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.