Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Need help on automatic generating 3d models in comsol with only parameters and function calls
Posted Feb 5, 2015, 11:30 a.m. EST Geometry, Materials Version 4.4 0 Replies
Please login with a confirmed email address before reporting spam
I am currently working on a project that requires me to automatic generate a square spiral shape in COMSOL. I found MATLAB live link could be a very good solution. However, I don't have any clue on how to automatic generate the 3d spiral model in COMSOL with only parameters and functions. I have attached a snapshot of my hand drawn cad model of the square spiral coil model I made. This an IGS cad model I built from rhino. Specifically, the function would require inputs of: number of turns, thickness and the width of the coil, separation between each turn and the total width of the entire spiral.
According to what I described above, the function will be a iteration call of “n” turns of coil. Any clues on how would I approach the problem would be very helpful!
Thank you so much.
Attachments:
Hello Chengjie Zhu
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.