Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Swept mesh
Posted Mar 7, 2015, 1:25 p.m. EST Mesh 1 Reply
Please login with a confirmed email address before reporting spam
Hello
I designed 3D plasmonic waveguide
I apply a triangular mesh on the input excitation boundary and then the swept mesh on the remaing geometry , how can i treat with sweep the mesh
What is the origion of the problem
Faild to create swept mesh for domain, Domain 3 unsupported topology of domain
I designed 3D plasmonic waveguide
I apply a triangular mesh on the input excitation boundary and then the swept mesh on the remaing geometry , how can i treat with sweep the mesh
What is the origion of the problem
Faild to create swept mesh for domain, Domain 3 unsupported topology of domain
1 Reply Last Post Mar 7, 2015, 8:48 p.m. EST
Please login with a confirmed email address before reporting spam
Posted:
10 years ago
Hi:
This time you should see help documentation.
This time you should see help documentation.