Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

convert VTK to vrml, stl

Posted Mar 10, 2015, 8:37 a.m. EDT Geometry Version 4.4 3 Replies

Yanissou
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I want to convert vtk to VRML or stl, to import geometry in COMSOL.
3 Replies Last Post May 26, 2015, 4:44 p.m. EDT
Chris M
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 10 years ago Mar 11, 2015, 8:14 a.m. EDT
I too would like to see VTK File import and Export supported
I too would like to see VTK File import and Export supported
Walter Frei COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 10 years ago Mar 11, 2015, 9:13 a.m. EDT
Dear Fares,

A cursory web search does show that VTK does have the ability to write STL files, which can be imported into COMSOL. There also appears to be the ability in VTK to write out a volumetric finite element mesh directly from VTK, which can often be preferable.

Best,
Dear Fares, A cursory web search does show that VTK does have the ability to write STL files, which can be imported into COMSOL. There also appears to be the ability in VTK to write out a volumetric finite element mesh directly from VTK, which can often be preferable. Best,
Yash Agarwal
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago May 26, 2015, 4:44 p.m. EDT

I want to convert vtk to VRML or stl, to import geometry in COMSOL.


From where are you creating the VTK files, is it image data? then perhaps you can consider software like ScanIP from Simpleware, where the FE/CFD or STL file can be created directly and imported in Comsol.
[QUOTE] I want to convert vtk to VRML or stl, to import geometry in COMSOL. [/QUOTE] From where are you creating the VTK files, is it image data? then perhaps you can consider software like ScanIP from Simpleware, where the FE/CFD or STL file can be created directly and imported in Comsol.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content