Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Run not reproducible

Posted Mar 12, 2015, 5:00 p.m. EDT Results & Visualization, Studies & Solvers Version 4.4 0 Replies

Daniel Kaiser
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I have a model (attached). I open it, compute results, and export the nodal pressure data. I then re-open it (without saving), compute results, and export the nodal pressure data. The two sets of nodal data for pressure are different by a few decimal places. This means I cannot exactly reproduce a run!

Does anyone know why this is happening?

Thanks!

Daniel
0 Replies Last Post Mar 12, 2015, 5:00 p.m. EDT
COMSOL Moderator

Hello Daniel Kaiser

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content