Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
About Computing Capacitance in Model Gallery Model ID: 12689
Posted Mar 14, 2015, 3:42 a.m. EDT Low-Frequency Electromagnetics Version 4.4 0 Replies
Please login with a confirmed email address before reporting spam
Recently I learned the "Computing Capacitance" in Model Gallery, the link is
www.comsol.com/model/computing-capacitance-12689
But there is one thing that I did not catch. Why they use glass as the insulating part, but other parts are set as air? Are they supposed to have metal plates as conductor? If i change the material of the plates to be copper, the results seem to be wired. Can anyone help me? Thanks so much!
Best,
Shan
Hello Shanliangzi Liu
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.