Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Problem in creating mesh

Posted Mar 24, 2015, 6:19 a.m. EDT Mesh Version 4.3 3 Replies

Vidhya Alavandar
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

hi

I have been trying to generate mesh for my stent model, it is showing out of memory whenever i try to build the mesh. I checked with my PC's RAM space. It has enough space to run.
I tried to build mesh for various element size also and it is still showing out of memory only.

I kindly ask the experts in this area to find a solution for this problem. Thanks in advance.
3 Replies Last Post Apr 9, 2015, 8:16 a.m. EDT
Lasse Murtomäki
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 10 years ago Mar 25, 2015, 8:40 a.m. EDT
If you send your model, I may look at it.

br
Lasse
If you send your model, I may look at it. br Lasse
Yoginder Kumar
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 10 years ago Apr 9, 2015, 8:07 a.m. EDT
does it shows out of memory during meshing or during study??
if during study check this out
go to study>solverconfuguration>solution>*** solver>out of core in settings and define as per ur system cnfugureation.
i think it may be help u..
plzz give ur feedback. thank u.
does it shows out of memory during meshing or during study?? if during study check this out go to study>solverconfuguration>solution>*** solver>out of core in settings and define as per ur system cnfugureation. i think it may be help u.. plzz give ur feedback. thank u.
Lasse Murtomäki
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 10 years ago Apr 9, 2015, 8:16 a.m. EDT
I do not rememeber having received your model.
I do not rememeber having received your model.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content