Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Calculating Current/Energy in an Inductor
Posted Apr 1, 2015, 8:21 a.m. EDT Low-Frequency Electromagnetics Version 5.0 1 Reply
Please login with a confirmed email address before reporting spam
Hii all,
Its probably ver simple. However, I am unable to find the current distribution is a simple square loop. Can anyone help. Also, since the square loop forms an inductor, I need to find the total energy lost due to the inductance :)
Thanks in advance.
Regards,
Anup
Its probably ver simple. However, I am unable to find the current distribution is a simple square loop. Can anyone help. Also, since the square loop forms an inductor, I need to find the total energy lost due to the inductance :)
Thanks in advance.
Regards,
Anup
1 Reply Last Post Apr 1, 2015, 9:19 a.m. EDT
Please login with a confirmed email address before reporting spam
Posted:
10 years ago
Hi Anup,
The following example discuss the correct modeling technique that you would need for modeling a close loop conductor.
www.comsol.com/model/modeling-of-a-3d-inductor-10299
Hope this helps.
Nirmal Paudel
COMSOL Employee
USA
The following example discuss the correct modeling technique that you would need for modeling a close loop conductor.
www.comsol.com/model/modeling-of-a-3d-inductor-10299
Hope this helps.
Nirmal Paudel
COMSOL Employee
USA