Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Wher can i reverse my axis?
Posted Apr 2, 2015, 12:55 p.m. EDT Version 5.0 2 Replies
Please login with a confirmed email address before reporting spam
Hello
My geometry is made from 0 to -5 in y direction. So y axis on the 2D plots goes from 0 to -5. I want to reverse this so i get the same plot but y axis goes from 0 to 5 instead.
Thanks
Arash
My geometry is made from 0 to -5 in y direction. So y axis on the 2D plots goes from 0 to -5. I want to reverse this so i get the same plot but y axis goes from 0 to 5 instead.
Thanks
Arash
2 Replies Last Post Apr 2, 2015, 8:19 p.m. EDT
Please login with a confirmed email address before reporting spam
Posted:
10 years ago
Arash,
you can make a mirror dataset. Look into 'Datasets' > 'More Datsets'
Cheers
Edgar
--
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
you can make a mirror dataset. Look into 'Datasets' > 'More Datsets'
Cheers
Edgar
--
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
Please login with a confirmed email address before reporting spam
Posted:
10 years ago
Edgar
That does not solve the issue. What i am looking for is something that does the same as the command "set(gta,'Ydir','reverse')" which just reverses the axis. So if you imagine a figure, afterwards the figure would look exactly the same but the y axis go from 0 to 5 (in the negative direction) instead of 0 to -5.
Thanks
That does not solve the issue. What i am looking for is something that does the same as the command "set(gta,'Ydir','reverse')" which just reverses the axis. So if you imagine a figure, afterwards the figure would look exactly the same but the y axis go from 0 to 5 (in the negative direction) instead of 0 to -5.
Thanks