Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Temperature echelon imposed for heat conduction

Posted Apr 17, 2015, 11:27 a.m. EDT Heat Transfer & Phase Change, Studies & Solvers Version 4.2 0 Replies

VU Cong Truc
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi all,

I have a temperature condition imposed on space between [y1; y2]: T= constant ; and all others are adiabatic boundaries for the heat conduction problem.

Contours of total heat flux magnitude are not good at two zone around y1 and y2 ( attachment file); because of the temperature echelon imposed, i think.

Are you know other way to impose the temperature condition to prevent this error?

Thanks for your attention
0 Replies Last Post Apr 17, 2015, 11:27 a.m. EDT
COMSOL Moderator

Hello VU Cong Truc

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content