Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
How comsol solves a stationary studyr in single phase flow with a parametric sweep
Posted Apr 22, 2015, 1:07 a.m. EDT Computational Fluid Dynamics (CFD), Results & Visualization Version 5.0 0 Replies
Please login with a confirmed email address before reporting spam
The problem which i am dealing is flow past a sphere in 3D. I have used a parametric sweep with different inlet velocities. I have found that instead of solving for the velocity directly, it is calculating the flow for intermediate values of velocity. The solutions which got with a single velocity value is different from that of the same value in a parametric sweep. Could any one help me why this is happening.
Hello Gollakota Anjani Ravikiran
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.