Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Perturbation Acoustics. No velocity values
Posted May 27, 2015, 4:42 a.m. EDT Acoustics & Vibrations Version 5.1 1 Reply
Please login with a confirmed email address before reporting spam
Hi,
I have created a mechanical & acoustic prestressed frequency-domain study. It can solve but cannot obtain velocity in acpr.
With my test, it turns out that the same issue happens at single acoustics model. The model attached has a pipe with pressure at an end and solves it with prestressed study. (I know the step1 is meaningless at this example model. Just for test. )
At result graphs, I can get p value but no acpr.v_inst and any other acpr.* values. Even p*p cannot be evaluated.
On the other hand, a normal frequency-domain study solves well.
Are there any my setting mistakes or bugs?
Regards,
Seki
I have created a mechanical & acoustic prestressed frequency-domain study. It can solve but cannot obtain velocity in acpr.
With my test, it turns out that the same issue happens at single acoustics model. The model attached has a pipe with pressure at an end and solves it with prestressed study. (I know the step1 is meaningless at this example model. Just for test. )
At result graphs, I can get p value but no acpr.v_inst and any other acpr.* values. Even p*p cannot be evaluated.
On the other hand, a normal frequency-domain study solves well.
Are there any my setting mistakes or bugs?
Regards,
Seki
Attachments:
1 Reply Last Post Jun 12, 2015, 9:52 a.m. EDT
Please login with a confirmed email address before reporting spam
Posted:
9 years ago
Hello Seki,
The Compute differential check box should not be marked in your plots. For quantities that are linear, like p, the two options are the same.
Kind regards,
Elin
The Compute differential check box should not be marked in your plots. For quantities that are linear, like p, the two options are the same.
Kind regards,
Elin