Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

S- Parameter analysis by using electromechanics for mems resoantor

Posted May 27, 2015, 5:06 a.m. EDT Low-Frequency Electromagnetics, MEMS & Nanotechnology, RF & Microwave Engineering, Acoustics & Vibrations, MEMS & Piezoelectric Devices, Structural Mechanics Version 4.4, Version 5.1 0 Replies

Rajesh Junghare
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello Friends,
I want to find S-parameter for MEMS based resonator with elctromechanics physics. In Comsol help, it shows that by using touchstone export it could be done. I heve tried it several times,but unable to complte it succesfully. Can anybody know how to perform S-paramter anlysis in Electromechanics?
0 Replies Last Post May 27, 2015, 5:06 a.m. EDT
COMSOL Moderator

Hello Rajesh Junghare

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content