Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Particle Distribution in channel section

Posted May 28, 2015, 1:07 p.m. EDT Charged Particle Tracing, Particle Tracing for Fluid Flow Version 5.1 0 Replies

Tim Femmer
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I take the "Particle Trajectories in a Laminar Static Mixer" case and would like to plot at the end of the tubular channel:

(a) the particle distribution (how many particles pass the outlet of the tube) plotted over the channel postion. Hence, see where are more and where are less particles?

(b) plot the particle distribution at the outlet over the channel width (z). More particles should be flowing along the middle of the tube, compared to the walls.

Best,

Tim
0 Replies Last Post May 28, 2015, 1:07 p.m. EDT
COMSOL Moderator

Hello Tim Femmer

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content