Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Pressure acoustics, Transient and Particle tracing for fluid flow coupling
Posted Jun 12, 2015, 4:59 p.m. EDT Charged Particle Tracing, Computational Fluid Dynamics (CFD), Particle Tracing for Fluid Flow, Studies & Solvers Version 5.1 1 Reply
Please login with a confirmed email address before reporting spam
I am trying to couple particle tracing with transient pressure acoustics. Is this possible? I run my pressure acoustics model in one study and then in the second study I run my particle tracing but the tracing particles just fall from gravity. I am new to comsol so I figure I am just doing something wrong, but I cannot seem to find info on running a time dependent pressure acoustics model and then using that data to run a time dependent particle tracing model. Can anyone help? I attached some photos.
**************Update************
I solved this problem. You can run them in the same study, in the particle tracing set the release for transient from static and then just setup a range of release times after the standing wave has fully developed. Worked like a gem.
**************Update************
I solved this problem. You can run them in the same study, in the particle tracing set the release for transient from static and then just setup a range of release times after the standing wave has fully developed. Worked like a gem.
Attachments:
1 Reply Last Post Jun 13, 2015, 7:41 p.m. EDT
Please login with a confirmed email address before reporting spam
Posted:
9 years ago
bump