Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Free surface laminar flow coupled to temperature
Posted Jun 25, 2015, 6:33 p.m. EDT Computational Fluid Dynamics (CFD), Mesh 0 Replies
Please login with a confirmed email address before reporting spam
0). Start with an initial geometry.
1). Solve heat conduction for temperature distribution
2). Solve laminar flow for fluid velocity subject to the boundary stress condition that depends on the temperature field solved in step 1).
3). Deform or move the meshes of one of the boundaries according to the velocity field in step 2) on the boundary.
4). Repeat step 1) to 3) till time is up.
I wonder if this process can be done in comsol without the microfluidic module. I have only managed to solve the system with a fixed mesh. Thank you very much.
Hello Chengzhe Zhou
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.