Eigenfrequency Shifts Caused by Temperature Changes
Application ID: 49331
This example explores the shift in natural frequencies caused by changing the temperature. One study investigates a doubly clamped beam where both ends are fixed, while the other study looks at a cantilever beam where only one end is fixed.
The following effects are studied:
- Stress stiffening
- Change in size
- Constraint effects
- Temperature-dependent Young's modulus
Results show that the clamped beam is dominated by stress softening where constrained expansion causes compressive stresses.
On the other hand, the cantilever beam shows a very good fit to analytical values based on the small changes in geometry caused by the thermal expansion.
The temperature dependence of Young's modulus is shown to be an important factor.
It is displayed that even at extreme thermal expansions, the current approach provides excellent accuracy.
Get more details related to this example in the following blog post: "How to Analyze Eigenfrequencies That Change with Temperature"
This model example illustrates applications of this type that would nominally be built using the following products:
however, additional products may be required to completely define and model it. Furthermore, this example may also be defined and modeled using components from the following product combinations:
- COMSOL Multiphysics® and
- either the MEMS Module, or Structural Mechanics Module
The combination of COMSOL® products required to model your application depends on several factors and may include boundary conditions, material properties, physics interfaces, and part libraries. Particular functionality may be common to several products. To determine the right combination of products for your modeling needs, review the Specification Chart and make use of a free evaluation license. The COMSOL Sales and Support teams are available for answering any questions you may have regarding this.