ENEL, Rome, Italy
Italian utility ENEL and the Italian National Agency for New Technologies joined together to develop a new kind of Concentrating Solar Power (CSP), using Parabolic Trough CSP to generate electricity during sunny hours as well as under overcast conditions or at night. This new type of CSP plant depends on molten salt as a medium for storing heat in large, well-insulated tanks.
Molten salt has several advantages over the previously used pressurized oil because it can operate at a higher temperature which maximizes energy efficiency and potentially reducing the consumption of fossil fuels. The tanks are half the size because no oil-to-salt heat exchangers are required, and they provide seven hours of thermal storage. The salt can also be cooled and re-used, which is much more efficient than oil which degrades with use.
Keeping salt in the liquid state presented a challenge for ENEL. They used COMSOL Multiphysics and its built in library of heat transfer coefficients to analyze temperature and heat loss throughout the drainage circuit, optimizing both its geometry and insulation properties.
Suggested Stories
Generative Design Puts Hydrogen Fuel Cell Development in High Gear
Toyota Research Institute of North America (TRINA) is working on hydrogen-powered vehicles. The TRINA team is using ...
Fine-Tuning an HVAC System Design with Simulation
Do you find your office too hot, too cold, or just right? Using simulation, HVAC system engineers can assess indoor ...
Simulating Tissue Biomechanics During Suction Therapies
To gain a better understanding of the tissue biomechanics involved in cupping therapy, a research team from the ...
The Growing Use of Simulation in the Biomedical Industry
From implants and stents to MRI and spinal cord stimulation, numerical modeling is paramount to biomedical device ...
