ABB AG Uses Simulation to Verify Designs for a More Reliable Recloser
O. Craciun, and colleagues
ABB AG
Ladenburgh, Germany
When a tree branch touches overhead cables and causes a momentary short circuit, your lights may flicker. A device called a recloser ensures that power to your home is not cut off for a longer period.
ABB AG, a leading manufacturer in power technology, is working towards designing a more reliable recloser. One objective in this design process was to optimize the size of the permanent magnet while ensuring excellent switching properties.
To do this, ABB AG created a 2D simulation using the AC/DC Module and calculated the magnetic flux density. Next, they used the electrical circuit feature to couple the actual power amplifier schematic and component values to the magnetic simulation. Finally, the results were fed into optimization software to select the appropriate size magnet and imported back into COMSOL Multiphysics software using LiveLink™ for MATLAB® to verify the design in a 3D model.
Suggested Stories
National Grid Models Underground Cable Routes
U.K. National Grid bears responsibility for maintaining the high-voltage transmission network in the U.K. Determining ...
Micromagnetic Simulation with COMSOL Multiphysics®
A guest blogger from Fudan University in China used the Physics Builder in COMSOL Multiphysics to create a ...
Get an Inside Look at an Innovative Rainwater Drainage System
Step into a busy neighborhood in Copenhagen, Denmark, to see how a multidisciplinary urban planning team used ...
Inspiring Young Engineers to Design for the Future at EPFL
EPFLoop, from the Swiss Federal Institute of Technology Lausanne (EPFL), designed their pod for the 2018 SpaceX ...
